Weight Around 1000kg With Microscope

•包含顯微鏡重量約1000公斤左右  

  Dimensions: 1000mmW*1400mmL*1400mmH   

•尺寸:  1000mm寬*1400mm長*1400mm高

  6" /8’’/12’’ chuck with Central Vacuum Hole and Vacuum rings for Sample holding, Independent control of each Vacuum channel

•6" /8’’/12’’ 卡盤，采用中心真空吸附孔和多圈真空吸附環固定樣品，每個真空通道均獨立控制                                      

  Super low noise triaxial Chuck and output Triaxial adapter      

•卡盤為三軸超低噪聲結構，電學獨立懸空，帶triaxial 電學接口      

  Chuck Flatness: 5µm                                                        

•卡盤平整度：5µm                                                             

  The Standard Central Vacuum hole is 1mm diameter,Can be customized according to customer requirements.                                                       

•標準卡盤中心吸附孔為1mm直徑，可以根據客戶要求定制                                         

  Chuck Quick roll out mechanism for fast wafer exchange                                            

•帶卡盤快速拉出機構，便于快速更換樣品                                                             

  Probe Card and probe card holder are adaptable to the Platen                                   

•探針平臺可以加裝探針卡和針卡夾具                                                             

  Platen can load up to 12 pcs micropositioners when TopHat is removed                     

•在不安裝八角盒時探針平臺可以加裝最多12個針座                                             

  Sealled Microchamber with high performance EMI/light/noise Shielding and frost Prevent

•高性能密閉微暗室有效的屏蔽EMI，光線和噪聲同時保持干燥正壓環境下樣品在低溫時無結霜                                                           

EMI屏蔽 > 30 dB (typical) @ 1 kHz to 1 MHz                                                   

光衰減    ≥ 130 dB                                                      

光譜噪聲基底       ≤ -180 dBVrms/rtHz (≤ 1 MHz)                                                       

系統交流噪聲       ≤ 5 mVp-p (≤ 1 GHz)                                                

  Optimized Microchamber for less CDA consumption                                          

•微暗室優化的腔體結構可以極大的減少干燥氣體消耗量                                               

  Chuck X-Y-Z-Theta High Precison Motorised Stage and Controlling system                

•Chuck X-Y-Z-Theta 四軸高精度電動移動平臺和控制系統                                           

  Chuck Driver Mechanism:Zero baklash Design，grinded ball screw and Linear Guide rail

•卡盤驅動機構:無回程差設計，研磨級循環滾珠絲杠和高精度導軌                         

  Motors:Low noise DC motor                                                          

•驅動電機:低噪直流電機驅動                                                            

  0.1 μm resolution linear Scales for all chuck stage axies                                              

•每一個軸均帶0.1微米線性光柵尺                                                          

  Chuck X-Y-Z Travel Range:200mm*300mm*20mm                                                    

•Chuck X-Y-Z 三軸行程分別為200mm*300mm*20mm                                                

  Highest Speed:X/Y axis> 70mm/S,Z axis> 20mm/S                                                     

•最高移動速度:X,Y軸>70mm/S，Z軸> 20mm/S                                                           

  Step Size: As small as 0.1µm in X，Y and Z                                                          

•X,Y,Z向運動解析度：最小為0.1微米                                                            

  Repeatability: +-1µm                                        

•往返重復精度:+-1µm                                          

  Accuracy: +-2µm                                              

•絕對定位精度:+-2µm                                   

  Chuck Theta Range:+-10°                          

• Chuck角度旋轉范圍+-10°                         

  Theta resolution:0.0001°                             

• Chuck角度旋轉精度：0.0001°                           

  Theta Repeatability: 0.0005°                        

•Theta往返重復精度:0.0005°                  

  Theta Accuracy: 0.001°                                                           

•Theta 絕對精度:0.001°                                                             

  Microscope X-Y-Z Motorised Stage and Controlling system                                       

•顯微鏡X-Y-Z 電動移動平臺和控制系統              

  Microscope X-Y-Z Travel 2" x 2" x 5"                                      

•可調節顯微鏡在 X-Y-Z三軸 2" x 2" x 5" 范圍內電動移動        

  Highest Speed:> 10mm/S                                                              

•最高移動速度:>10mm/S                                                           

  Step Size: As small as 0.1µm in X and Y                                                        

•移動解析度：最小為0.1微米                                                          

  Repeatability: +-1µm                                                             

•往返重復精度:+-1µm                                                        

  Accuracy: +-2µm                                                            

•絕對定位精度:+-2µm                                                        

  Computer Interface: RS232/485,TCP/IP,GPIB etc.                                                        

•計算機連接端口:RS232/485,TCP/IP,GPIB 等                                                          

  High Perfomance Vibration Free Table built in Design                                   

•一體化的高性能防震系統      

Option   Joystick

              •手動控制盒，帶操縱桿     

                Gold Plating For Chuck   

              •Chuck鍍金，具有更低的接觸電阻 

                5Bar High pressure gas purge design to prevent HV electric arc       

              •腔體內5個大氣壓正壓氣體吹拂設計，有效避免高壓放電 

                HV Chuck 10KV      

              •耐高壓卡盤 10KV（帶高壓輸出接口）  

                HC Chuck 500A      

              •耐大電流卡盤 500A（帶kelvin大電流輸出接口）